Jump to content
ANDROID ZONE
Sign in to follow this  
APK

OBDeleven car diagnostics app VAG OBD2 Scanner v0.11.2 [Pro]

Recommended Posts

OBDeleven car diagnostics app VAG OBD2 Scanner v0.11.2 [Pro]
Requirements: 4.1+
Overview: PRO Diagnostics, Programming and Monitoring for all Audi, Volkswagen, Seat and Škoda vehicles.

dyR5kkmHlMdSEThKPB9ionfnd_fWK1DJAVeAW5Mx


PRO Diagnostics, Programming and Monitoring for all Audi, Volkswagen, Seat and Škoda vehicles.

BASIC App Features:
- Automatic vehicle identification from VIN (Vehicle identification number)
- Automatic all systems scanning and analyzing
- Read and clear diagnostic trouble codes from all control units that is installed in your car (i.e. Engine, Transmission, ABS, Airbag, Multimedia, Air conditioning, etc.)
- Read information about control unit (i.e. Part number, Software number, Coding, etc.)
- Multi language database
- Diagnostic data log sharing via email
- Car battery analyzer
- Connected cars history
- Information about car
- Gauges
- Device Alert
- Engine, Equipment and Fault code lookup
- DIY manuals

PRO App Features:
- Trouble code Freeze frame
- Advanced control unit information
- Live data, measurements
- Textual Long coding, Adaptations, Live data, Basic settings, Output test for UDS control units
- Charts
- Coding
- Coding II
- Long coding
- Sub control units information
- Sub control units coding
- Getaway installation list coding
- Adaptation
- Long Adaptation
- Basic settings
- Output test
- Security access
- Login finder
- Readiness (UDS)
- Control unit reset (UDS)
- Diagnostic service change
- Control unit Backup
- Control unit programming history
- Car programming history

NEW
- Coding, Adaptations, Live data, Basic settings Labels Developer (Now only for Beta testers)

APPS (one click functions)
Activate or deactivate car functions in just one click. More than 500 different apps are available for various vehicles to fast and easily control comfort, lightning and other settings. Apps may depend on the vehicle equipment. Apps use additional in app credits.

SUPPORTED MODELS:
All VAG ( Audi | VW | Seat | Škoda ) models are supported! Some models until 1996 years need VAG 2X2 adapter.

Volkswagen :
UP | Polo | Golf | Golf Plus | Golf Sportsvan | Beetle | Bora | Corrado | Scirocco | Jetta | Vento | Touran | Tiguan | Eos | Fox | Lupo | Passat | Passat CC | Sharan | Touareg | Phaeton | Caddy | Multivan | Transporter | Multivan | Vento | Amarok | XL1 | Arteon

Audi :
80 | 90 | 100 | 200 | A1 | S1 | A2 | A3 | S3 | RS3 | A4 | S4 | RS4 | A5 | S5 | RS5 | A6 | S6 | RS6 | A7 | S7 | RS7 | A8 | S8 | Q2 | SQ2 | Q3 | SQ3 | RS Q3 | Q5 | SQ5 | Q7 | SQ7 | TT | TTS | TT RS | R8 | R8 Spyder | Coupe | Cabriolet

Škoda :
Citigo | Fabia | Felicia | Roomster | Rapid | Octavia | Yeti | Superb | Praktik | Kodiaq

Seat :
Mii | Ibiza | Toledo | Leon | Altea | Alhambra | Arosa | Cordoba | Exeo | Inca | Ateca

OBDeleven DEVICE:
Unique Bluetooth device, which allows you to do full car systems diagnostics, programming and monitoring. The device connects to OBD-II diagnostic socket. This tool works only with OBDeleven application for Android.

IMPORTANT:
This application doesn't work with ELM327 and other OBD-II devices! It requires unique OBDeleven device.
The system is using online databases so it requires a good internet connection for fast and smooth work!

WIKI and SUPPORT:
https://voltas-it.helpshift.com


What's New:
v0.11.2
- PRO code usage reminder (prompts on which account you have used your code)
- Fixed UDS adaptations
- Fixed garage scroll to beginning
- Fixed garage sort issue
- Fixed garage sort dissapear when using search
- Fixed app spinner height while loading value
- Fixed history log issue

● PRO features unlocked
 ● Login Required
 ● Release by Zameel

This app has NO advertisements

More Info:

https://play.google.com/store/apps/details?id=com.voltasit.obdeleven


Download Instructions:

https://dropapk.com/8vxn8xjof6nn

https://douploads.com/gmlemeziv7ga
 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  



  • Similar Content

    • By TWD
      incredibox v0.4.0 (Paid)
      Requirements: 4.1
      Overview: Incredibox is a musical game that helps you create a mix very easily by managing a band of beatboxers.

      Just drag and drop icons on the different characters and start creating music! Find the right combos during the game and unlock animated bonuses that will help you improve your mix.
      Record your creation, then share it with your friends all over the world. If you get enough votes, you may join the Top 50 chart. Too lazy to create your own mix? No problem, just let the automatic mode play for you
      Express you musicality with Incredibox!
      Pump it up and chill
      https://youtu.be/U7oEyOFZLME
      What's New: 
      • A brand new version 7 called “Jeevan” has been added to the app!
      • Find the right sounds combo and unlock the first video clip (next ones coming soon)
      • Minor bug fixes
      This app has no advertisements
      More Info:

      https://play.google.com/store/apps/details?id=com.sofarsogood.incredibox
      Download Instructions:     
      https://www.uploadship.com/cae74443563afd66
      Mirror
      http://ul.to/vs6wab96
      https://uploadrar.com/jv43gosa3aj6
       
    • By APK
      OpenDiag Mobile v2.17.2 [Premium]
      Requirements: 3.1 and up
      Overview: Mobile direction of the OpenDiag project! Software for android 3.1 and higher for diagnosing Russian-made cars using ECU (Electronic Control Unit) protocols, using ELM 327 Bluetooth or Wi-Fi adapters, ELM 327 USB or K-Line, USB K + CAN Commander v1.4.


      Software for android 3.1 and higher for diagnosing Russian-made cars using ECU (Electronic Control Unit) protocols, using ELM 327 Bluetooth or Wi-Fi adapters, ELM 327 USB or K-Line, USB K + CAN Commander v1.4.
      ELM The program is focused on original ELM327 chips https: // http://www.elmelectronics.com. Not all Chinese adapters support the full functionality of the original ELM327. Therefore, if OpenDiag does not connect to the ECU, do not “kick” other programs that connect. They communicate with the computer standard OBD-II. OpenDiag communicates via ECU protocol and requires full functionality of the original ELM327. The OBD-II standard is supported by the program in its simplest form, select the OBD-II block and connect!
      USB USB adapters require USB host support by smartphone or tablet.
      Supported USB adapter chips (tested): FTDI (FT232RL), WCH (CH340), Prolific (PL2303), Silicon Labs (CP2102, speed redefinition is required https://chiptuner.ru/content/pub_20/).
      CyanogenMod 12/13, LineageOS 13, Replicant 6 
      Do not install the program on devices with these firmware, otherwise the device will go into perpetual reboot!
      Warning! 
      * Auto detection of your car’s computer control is NOT GUARANTEED!
      * There are no diesel blocks in the program.
      * The program has blocks with paid content. When connecting to such a block, the program reports what is needed to activate the block, or how to disable the demo mode of the block.
      * Activating the unit does not solve problems with connecting to the computer!
      * Owners of activated blocks on one device for two more devices can activate these blocks for free.
      * Change device for free.
      Realized blocks < / b> , possible connectivity issues , < a href = "https://w3bsit3-dns.com/forum/index.php?act=findpost&pid=32615681&anchor=Spoil-32615681-6"> previous versions and much more, in the header program forum https://w3bsit3-dns.com.ru/forum/index.php?showtopic=585411
      Discussion ELM327 Bluetooth / USB / WI-FI (including purchase) on
      http://w3bsit3-dns.com/forum/index.php?showtopic=639908
      You can purchase proven adapters from OpenDiag Mobile from our partners http://www.opendiag.pro/dillers
      The program has a menu and, most importantly, there is a HELP! A lot of questions and suggestions for which there are answers in this help!
      Those looking for English: 1) Press the menu button 2) Select 'language' (language) 3) Select 'English' (English) 4) Select 'restart' (restart)
      Is there a problem with the program ?! Report on the forums:
      http: //www.auto- bk.ru/forum/topic/49835-opendiagmobile-%D0%B4%D0%BB%D1%8F-android/ 
      http://w3bsit3-dns.com/forum/index.php?showtopic=585411
      http://autolada.ru/viewtopic.php?t=289731
      Or write to the developer’s mail !
      What's New: 
      Correction in case of failure of the user program in the required permissions. As a result, the program crashed with an error, especially with bluetooth adapters.
      Premium Features Unlocked
      This app has no advertisements
      More Info: credit sserratty

      https://play.google.com/store/apps/details?id=ru.spb.OpenDiag&hl=en
      Download Instructions:
      https://uploadrar.com/809xerpna8ba
       
      https://dropapk.com/swbc377pefo3
       
      https://upload.ac/6jzqhycpdbl0
    • By APK
      inCarDoc Pro | ELM327 OBD2 v7.4.2 [Paid]
      Requirements: 4.0.3+
      Overview: Reads real-time and stored parameters from ECU of OBD-II compliant cars.
      Support data reading from cars with 2 and more ECU.
       

      Before purchasing please check the compatibility with free version of OBD Car Doctor
      Features:
      Common:
      - real-time engine and vehicle parameters: speed, rotation, temperature, pressure, lambda and
      multiple other sensors data supported by your car
      - chart drawing for real-time data
      - check engine light control: read and clear stored error codes and related freeze frame data
      Pro version:
      - allow real time parameters recording
      - read, display, read multiple parameters simultaneously
      - recording parameters in background mode
      - view and sending recorded parameters traces
      - GPS support
      - Fuel Economy parameters (beta version)
      - Upload to server (beta version) http://www.incardoc.com
      - (new) store and share DTC data and General info
      - (new) auto-start of last used command screen (use "Auto start of the last command" option in
      Configuration alone or in combination with "Connect BT at start")
      - (new) console for advanced users experiments with OBD-II and adapter commands
      (use "Test"-"Console" option in Configuration to allow console screen)
      - (new) Consumption fuel per time
      Fuel Economy parameters now supported as beta version feature, please note that for correct
      calculation you may need to enter proper Engine displacement (in cubic cm) and volumetric
      efficiency (in %, the default is 80)Diesel engines are not fully supported now, please contact
      developers if want to participate in Diesel values testing.
      For files uploading do the following when your device connected to Internet:
      - create account with Registration option in through the application (Menu-Configuration-Account) or with site option http://incardoc.com
      - set your Login and Password in Account
      (Menu-Configuration-Account)
      - upload your traces to server: open list of recorded traces at OBD Records
      page, long click on item, select "Send to service" in popup menu
      - visit http://incardoc.com and login at Personal account page to view the traces.
      Note!!! Requires ELM 327 or compatible Bluetooth Adapter.
      Note!!! Avoid simultaneous running of multiple OBD reading applications, be sure that
      other applications are not keeping live OBD connection.
      Please send your questions with email, as we can't answer in Play market comments.
      You could help to improve the project by sending OBD-II details info related to your car.
      Fill in the car details with configuration screen and click send button in "General information" section.
      Thanks!
      What’s New:
      - added support and improved economy calculations for Chevrolet Volt
      - user interface improvements
      - logbook: bug fixes
      This app has no advertisements
      More Info:

      https://play.google.com/store/apps/details?id=com.pnn.obdcardoctor_full
      Download Instructions:
      https://uploadrar.com/anh2lyvf0fe8
       
      https://dropapk.com/yjtuzwo6g0ey
       
      https://uploadev.org/ft47s7119699
       
      https://dailyuploads.net/zq4n0ojci074
       
      https://upload.ac/p815tw2z7a50
       
    • By APK
      RegexH v2.0.0 [Unlocked]
      Requirements: 4.0.3 and up
      Overview: RegexH is your app for working and / or learning regular expressions at different levels.
       

      With this application you will be able to understand a regex expression, thanks to the complete explanation of each of the elements that compose it. In addition, it allows you to design regular expressions by just selecting pre-established components.
      Moreover it has other functionalities as:
      -value expressions
      -recognize captured groups
      -to make replacements
      -generate common expressions
      - save the regex you use most *
      It also has the necessary information about the different elements that make up the syntax of regex expressions.
      The design of this application is specially meditated to facilitate navigation to the user.
      *Help translate the app to more languages via GitHub https://github.com/sky10p/regexh-languages
      *This is the free version. Ads have been deleted when saving regular expressions. There is a paid version that adds some non-essential functionality (In Default Terms submenu, you can use regular expressions by default)
       What's New
      Version 2.0.0
      In this new update, the most used predefined expressions have been set free:
      -IPv4 valid
      -URL
      It has been added a new predefined expression:
      -IPv6
      Libraries and versions have also been updated to be compatible with Android O.
      Mod Info:
      ● Paid features Unlocked
       ● Works Offline
       ●  Release by Kirlif'
      This app has no advertisements
      More Info:

      https://play.google.com/store/apps/details?id=sky.programs.regexh
      Download Instructions:
      https://uploadrar.com/insyzoh2fo2i
       
      https://dropapk.com/bek5awr273ie
       
      https://douploads.com/9pz8cywtp5hg
       
    • By caffeine
      VAG DPF v3.2.0 [Patched]
      Requirements: 4.1+
      Overview: AG DPF shows you the most important data related to the DPF particulate filter and its regeneration phases using an ELM327 Bluetooth/WIFI adapter.

      With this app you can know if the filter is actually in regeneration process, if a regeneration is waiting to complete, how many km have you traveled since last regeneration, etc. This app doesn't use standard OBD2 commands as almost all other apps, it uses directly CAN commands specific of car model and this is the reason why it doesn't work with every car; due to the use of CAN commands, the app needs al least a decent ELM327 adapter (see note below); some users reports correct app working with a 10-15 euro adapter.
      VAG DPF community: google.com/+ApplagaApp
      ATTENTION!! This app works only with VAG (Audi Volkswagen Seat Skoda) that are equipped with engines listed below; for diesel engines not listed is not guaranteed the full compatibility, so if you anyway buy the app, consider that some or all functions couldn't work correctly.
      IMPORTANT!! Before buying this app I suggest to try the app "VAG DPF Free" to check the correct functionality of your adapter and your Android because the free application shares the connection method and the data reading code so it's perfect to test if these important functions are working correctly.
      Engines supported:
      CRBC (2.0TDI 150CV)
      CFHD (2.0TDI 143CV)
      CUNA (2.0TDI 184CV)
      CFFB (2.0TDI 140CV)
      CFWA (1.2TDI 75CV)
      CLHA (1.6TDI 105CV)
      CXXB (1.6TDI 110CV)
      CAYC (1.6TDI 105CV)(partially on Passat 3C MY10)
      CAHA (2.0TDI 170CV)(beta, requires verification)
      Tested by users:
      CFGB,CFGC,CJCA,CRMB,CUPA,CUSA,CXFA,CAYB,CAYD,CRLB,CUTA,CFHC,CAGA(*),CSHA,CJCD,DFSB,CLAB,DFLA,DCXA,CFCA
      (*) = partial support
      IMPORTANT some of the engines above may be incompatible, it depends on the engine software version, so use the VAG DPF FREE app to check your engine before buy!!!!
      Core functions:
      - Display of 12 DPF filter parameters like: soot mass accumulation in the filter, regeneration duration, km traveled and time passed since last regeneration, EGR valve closing, exhaust gas temperatures of inlet and outlet of DPF (Attention: data shown may vary depending of the engine type due to the presence of the parameters into the engine ecu)
      - Manual or automatic parameters update
      - Display, for all the parameters, of the previous value and the difference between the actual and the previous value (only for automatic update delays different from 0 seconds)
      - Ability to exclude one or more parameter to increase the reading speed
      - Display of the filter filling percentage before reaching of the filling limit that starts the execution of a field regeneration (standard regeneration controlled by the engine ecu)
      - Graphical display, using a progress bar, of the filling percentage value before starting a field regeneration or a service regeneration
      - Graphical display of the filter status: red filter for the regeneration phase (passive, field or service) of grey filter with different back internal areas depending on the filling percentage value
      - Display of extra data: adapter communication error counter, filter filling rating in µg/min, update time of all the 12 parameters, automatic update delay actually selected in options menu
      - Notification bar icon to show an active connection and the auto-update process running
      To know all the functions explained in detail you can open a little guide directly in the app's menu.
      About ELM327 adapters:
      Currently on the market you can find a huge list of low cost clone ELM327 adapters using a cloned simplified version of the ELM327 chip; using these adapters with this app may introduce readings errors and also car connection problems or app freezing.
      For an optimal use I suggest a good quality adapter like an OBDLink LX, but the app also works with cheap adapters provided decent quality.
      What's New:
      3.2.0
      - fixed dataset for group 5
      Mod Info:
      No LP or Google Play Modded needed.
      This app has no advertisements
      More Info:

      https://play.google.com/store/apps/details?id=com.applagapp.vagdpf
      Download Instructions:
      https://uploadrar.com/3qhqoov5ul5j
       
      https://dropapk.com/mwqq8rsvygau
       
      https://upload.ac/675ol15skbhr
       
    • By APK
      Aurora Store v3.0.6 [Lite Mod]
      Requirements: 5.0+
      Overview: The ability to download and install programs from the PlayStore without depending on the Play Market application and google services. Is fork of the program Yalp Store in the style of material design 2.0 and some additional features.
       

      YalpStore is a very well coded app, but it lacks Material Design, Sergey Yeriomin has clearly mentioned
      he will not redo UI/UX changes as his intention is to support devices from Android 2.x to 8.x which is perfectly fine.
      Adding up new Material UI Libraries will increase the app size, which would defeat its purpose in context of older devices.
      Also in an attempt to have wider device support the YalpStore uses some depreciated Android Libraries/Methods which have
      (minor) Security/MemoryLeak issues.
      Some of us try to avoid GooglePlayServices as much as possible, because of the MemoryUsage/StorageSpace/Privacy/UnwantedUpdates.
      But not all of us use Devices with Lower RAM and InternalMemory, so I thought of redesigning YalpStore
      I renamed the YalpStore to Aurora to avoid any ambiguity that may arise.
      In Aurora I will try my best to solve this issues, and provided a clean material design.
      What's New: 
      • Written from scratch
      • Added support for Split APKs
      • Added in-app Download Manager
      • Added new improved Notification Manager
      • New UI based on latest MD Guidelines
      • Deployed dedicated token-dispenser
      • Improved Blacklist Manager
      • Added Favourite Apps Manager
      • and more..
      Language: en, ru, uk
      Deeply optimized application graphics
      Optimized application manifest
      Signature changed
      This app has no advertisements
      More Info: credit AlexStrannik

      http://auroraoss.com/
      Download Instructions:
      https://uploadrar.com/cmsofdgw8v1w
       
      https://dropapk.com/2aadv75hz6cd
       
      https://upload.ac/c8xk2blurfd7
    • By APK
      VAG DPF v3.1.0 [Patched]
      Requirements: 4.1+
      Overview: AG DPF shows you the most important data related to the DPF particulate filter and its regeneration phases using an ELM327 Bluetooth/WIFI adapter.


      With this app you can know if the filter is actually in regeneration process, if a regeneration is waiting to complete, how many km have you traveled since last regeneration, etc. This app doesn't use standard OBD2 commands as almost all other apps, it uses directly CAN commands specific of car model and this is the reason why it doesn't work with every car; due to the use of CAN commands, the app needs al least a decent ELM327 adapter (see note below); some users reports correct app working with a 10-15 euro adapter.
      VAG DPF community: google.com/+ApplagaApp
      ATTENTION!! This app works only with VAG (Audi Volkswagen Seat Skoda) that are equipped with engines listed below; for diesel engines not listed is not guaranteed the full compatibility, so if you anyway buy the app, consider that some or all functions couldn't work correctly.
      IMPORTANT!! Before buying this app I suggest to try the app "VAG DPF Free" to check the correct functionality of your adapter and your Android because the free application shares the connection method and the data reading code so it's perfect to test if these important functions are working correctly.
      Engines supported:
      CRBC (2.0TDI 150CV)
      CFHD (2.0TDI 143CV)
      CUNA (2.0TDI 184CV)
      CFFB (2.0TDI 140CV)
      CFWA (1.2TDI 75CV)
      CLHA (1.6TDI 105CV)
      CXXB (1.6TDI 110CV)
      CAYC (1.6TDI 105CV)(partially on Passat 3C MY10)
      CAHA (2.0TDI 170CV)(beta, requires verification)
      Tested by users:
      CFGB,CFGC,CJCA,CRMB,CUPA,CUSA,CXFA,CAYB,CAYD,CRLB,CUTA,CFHC,CAGA(*),CSHA,CJCD,DFSB,CLAB,DFLA,DCXA,CFCA
      (*) = partial support
      IMPORTANT some of the engines above may be incompatible, it depends on the engine software version, so use the VAG DPF FREE app to check your engine before buy!!!!
      Core functions:
      - Display of 12 DPF filter parameters like: soot mass accumulation in the filter, regeneration duration, km traveled and time passed since last regeneration, EGR valve closing, exhaust gas temperatures of inlet and outlet of DPF (Attention: data shown may vary depending of the engine type due to the presence of the parameters into the engine ecu)
      - Manual or automatic parameters update
      - Display, for all the parameters, of the previous value and the difference between the actual and the previous value (only for automatic update delays different from 0 seconds)
      - Ability to exclude one or more parameter to increase the reading speed
      - Display of the filter filling percentage before reaching of the filling limit that starts the execution of a field regeneration (standard regeneration controlled by the engine ecu)
      - Graphical display, using a progress bar, of the filling percentage value before starting a field regeneration or a service regeneration
      - Graphical display of the filter status: red filter for the regeneration phase (passive, field or service) of grey filter with different back internal areas depending on the filling percentage value
      - Display of extra data: adapter communication error counter, filter filling rating in µg/min, update time of all the 12 parameters, automatic update delay actually selected in options menu
      - Notification bar icon to show an active connection and the auto-update process running
      To know all the functions explained in detail you can open a little guide directly in the app's menu.
      About ELM327 adapters:
      Currently on the market you can find a huge list of low cost clone ELM327 adapters using a cloned simplified version of the ELM327 chip; using these adapters with this app may introduce readings errors and also car connection problems or app freezing.
      For an optimal use I suggest a good quality adapter like an OBDLink LX, but the app also works with cheap adapters provided decent quality.
      What's New:
      3.1.0
      - fixed EGR request for group 5
      Mod Info:
      No LP or Google Play Modded needed.
      This app has no advertisements
      More Info:

      https://play.google.com/store/apps/details?id=com.applagapp.vagdpf
      Download Instructions:
      https://uploadrar.com/yxp7g2qfle3t
       
      https://dropapk.com/waqc2a5a1r5n
       
      https://douploads.com/t29dzwvgnh7a
       
    • By APK
      VAG DPF v3.0.0 [Patched]
      Requirements: 4.1+
      Overview: AG DPF shows you the most important data related to the DPF particulate filter and its regeneration phases using an ELM327 Bluetooth/WIFI adapter.


      With this app you can know if the filter is actually in regeneration process, if a regeneration is waiting to complete, how many km have you traveled since last regeneration, etc. This app doesn't use standard OBD2 commands as almost all other apps, it uses directly CAN commands specific of car model and this is the reason why it doesn't work with every car; due to the use of CAN commands, the app needs al least a decent ELM327 adapter (see note below); some users reports correct app working with a 10-15 euro adapter.
      VAG DPF community: google.com/+ApplagaApp
      ATTENTION!! This app works only with VAG (Audi Volkswagen Seat Skoda) that are equipped with engines listed below; for diesel engines not listed is not guaranteed the full compatibility, so if you anyway buy the app, consider that some or all functions couldn't work correctly.
      IMPORTANT!! Before buying this app I suggest to try the app "VAG DPF Free" to check the correct functionality of your adapter and your Android because the free application shares the connection method and the data reading code so it's perfect to test if these important functions are working correctly.
      Engines supported:
      CRBC (2.0TDI 150CV)
      CFHD (2.0TDI 143CV)
      CUNA (2.0TDI 184CV)
      CFFB (2.0TDI 140CV)
      CFWA (1.2TDI 75CV)
      CLHA (1.6TDI 105CV)
      CXXB (1.6TDI 110CV)
      CAYC (1.6TDI 105CV)(partially on Passat 3C MY10)
      CAHA (2.0TDI 170CV)(beta, requires verification)
      Tested by users:
      CFGB,CFGC,CJCA,CRMB,CUPA,CUSA,CXFA,CAYB,CAYD,CRLB,CUTA,CFHC,CAGA(*),CSHA,CJCD,DFSB,CLAB,DFLA,DCXA,CFCA
      (*) = partial support
      IMPORTANT some of the engines above may be incompatible, it depends on the engine software version, so use the VAG DPF FREE app to check your engine before buy!!!!
      Core functions:
      - Display of 12 DPF filter parameters like: soot mass accumulation in the filter, regeneration duration, km traveled and time passed since last regeneration, EGR valve closing, exhaust gas temperatures of inlet and outlet of DPF (Attention: data shown may vary depending of the engine type due to the presence of the parameters into the engine ecu)
      - Manual or automatic parameters update
      - Display, for all the parameters, of the previous value and the difference between the actual and the previous value (only for automatic update delays different from 0 seconds)
      - Ability to exclude one or more parameter to increase the reading speed
      - Display of the filter filling percentage before reaching of the filling limit that starts the execution of a field regeneration (standard regeneration controlled by the engine ecu)
      - Graphical display, using a progress bar, of the filling percentage value before starting a field regeneration or a service regeneration
      - Graphical display of the filter status: red filter for the regeneration phase (passive, field or service) of grey filter with different back internal areas depending on the filling percentage value
      - Display of extra data: adapter communication error counter, filter filling rating in µg/min, update time of all the 12 parameters, automatic update delay actually selected in options menu
      - Notification bar icon to show an active connection and the auto-update process running
      To know all the functions explained in detail you can open a little guide directly in the app's menu.
      About ELM327 adapters:
      Currently on the market you can find a huge list of low cost clone ELM327 adapters using a cloned simplified version of the ELM327 chip; using these adapters with this app may introduce readings errors and also car connection problems or app freezing.
      For an optimal use I suggest a good quality adapter like an OBDLink LX, but the app also works with cheap adapters provided decent quality.
      What's New:
      3.0.0
      - added floating window mode (experimental)
      - grouped similar parameters in a double value field
      - aggiunto campo differential pressure per i motori che lo includono
      - changed log version due to previous points
      - added shortcuts for launcher icon
      - little graphical changes
      - added DGTD engine (thanks Gabriele)
      - moved DFFA engine from group 12 to 14
      Mod Info:
      No LP or Google Play Modded needed.
      This app has no advertisements
      More Info:

      https://play.google.com/store/apps/details?id=com.applagapp.vagdpf
      Download Instructions:
      https://uploadrar.com/pcd5f0o1qlk0
       
      https://dropapk.com/drf0vzbwnbcn
       
      https://douploads.com/hqg0f6l9e1xo
       
    • By APK
      ImperiHome – Smart Home & Smart City Management v4.3.9 [Pro]
      Requirements: 4.0.3 and up
      Overview: With ImperiHome, control your home automation systems and connected objects from a single and highly customizable interface.
       

      No need for a central server or dedicated setup. The application directly connects to your systems using APIs and allows you to remotely interact with all your devices.
      Currently, ImperiHome is able to connect to:
      - Logitech Harmony (hub-based remotes)
      - Musaic (Smart HiFi speakers)
      - Sonos (Connected HiFi system)
      - Kodi (Home theater software, formerly known as XBMC)
      - LIFX Light bulbs (Smart lighting system by LIFX)
      - Flower Power (Smart plant sensor by Parrot)
      - EcoCompteur 412000 (Electricity counter by Legrand)
      - Fibaro Home Center 2 (ZWave controller by Fibaro)
      - Myfox Home Control 2 (security and home control system)
      - Philips Hue (lighting system)
      - Vera Edge, VeraLite, Vera (ZWave controllers by Micasaverde / Vera Control) UI5 and UI7
      - ZiBase (Multi-protocol controller by Zodianet)
      - eedomus (ZWave controller by Connected Object)
      - IPX800 (Relay controller by GCE Electronics)
      - Eco-Devices (Teleinfo energy counter by GCE Electronics)
      - Netatmo Weather Station
      - Koubachi Plant Sensor
      - LightManager (Controller by JBMedia)
      - Zipabox (Multi-protocol controller by Zipato) / Cameras and security features not yet supported
      - Systems implementing the ISS API (ImperiHome Standard System)
      - MJPEG, MPEG4, h264 IP cameras
      - … more will come!
      At home using your wall-mounted tablet or outside using your smartphone, take benefit of ImperiHome features to control your smart home the way you want:
      - fast and responsive user interface
      - voice recognition
      - NFC tags actions
      - charts module
      - customizable dashboards with smart widgets (limited in free version)
      - Android shortcuts
      - local or remote network auto detection
      - layouts for both smartphones and tablets
      - several options to fine-tune the application
      - import/export preferences (only in pro version)
      - Sony SmartWatch2 integration
      - Automatic wake-up using front camera move detection. WARNING: this feature is highly dependent on the type of device and camera. We can't guarantee it will work wit all devices.
      - Tasker Plugin (pro version only)
      - REST Control API (pro version only)
      - Android Wear support (voice commands and camera viewing)
      Smart Connect extension for SmartWatch 2
      What's New:
      *Remove widget plus sign with transparent theme
      *Update ISS devices
      *New settings : desactiviate update popup
      *Philipps Hue : bug fix.
      *Tasker plugin : dimmer command.
      *Weather connector : display GPS coordinate if several cities with same name.
      *Bugs Fixes
      Mod Info:
      ● Pro features Unlocked
       ● Release by Kirlif'
      This app has no advertisements
      More Info:

      https://play.google.com/store/apps/details?id=com.imperihome.lite
      Download Instructions:
      https://uploadrar.com/pmrw8qeyvzf1
       
      https://dropapk.com/7amxyb220848
       
      https://douploads.com/x0kzhn7a6gmr
       
    • By caffeine
      ImperiHome – Smart Home & Smart City Management v4.3.9 [Pro]
      Requirements: 4.0.3 and up
      Overview: With ImperiHome, control your home automation systems and connected objects from a single and highly customizable interface.
       

      No need for a central server or dedicated setup. The application directly connects to your systems using APIs and allows you to remotely interact with all your devices.
      Currently, ImperiHome is able to connect to:
      - Logitech Harmony (hub-based remotes)
      - Musaic (Smart HiFi speakers)
      - Sonos (Connected HiFi system)
      - Kodi (Home theater software, formerly known as XBMC)
      - LIFX Light bulbs (Smart lighting system by LIFX)
      - Flower Power (Smart plant sensor by Parrot)
      - EcoCompteur 412000 (Electricity counter by Legrand)
      - Fibaro Home Center 2 (ZWave controller by Fibaro)
      - Myfox Home Control 2 (security and home control system)
      - Philips Hue (lighting system)
      - Vera Edge, VeraLite, Vera (ZWave controllers by Micasaverde / Vera Control) UI5 and UI7
      - ZiBase (Multi-protocol controller by Zodianet)
      - eedomus (ZWave controller by Connected Object)
      - IPX800 (Relay controller by GCE Electronics)
      - Eco-Devices (Teleinfo energy counter by GCE Electronics)
      - Netatmo Weather Station
      - Koubachi Plant Sensor
      - LightManager (Controller by JBMedia)
      - Zipabox (Multi-protocol controller by Zipato) / Cameras and security features not yet supported
      - Systems implementing the ISS API (ImperiHome Standard System)
      - MJPEG, MPEG4, h264 IP cameras
      - … more will come!
      At home using your wall-mounted tablet or outside using your smartphone, take benefit of ImperiHome features to control your smart home the way you want:
      - fast and responsive user interface
      - voice recognition
      - NFC tags actions
      - charts module
      - customizable dashboards with smart widgets (limited in free version)
      - Android shortcuts
      - local or remote network auto detection
      - layouts for both smartphones and tablets
      - several options to fine-tune the application
      - import/export preferences (only in pro version)
      - Sony SmartWatch2 integration
      - Automatic wake-up using front camera move detection. WARNING: this feature is highly dependent on the type of device and camera. We can't guarantee it will work wit all devices.
      - Tasker Plugin (pro version only)
      - REST Control API (pro version only)
      - Android Wear support (voice commands and camera viewing)
      Smart Connect extension for SmartWatch 2
      What's New:
      *Remove widget plus sign with transparent theme
      *Update ISS devices
      *New settings : desactiviate update popup
      *Philipps Hue : bug fix.
      *Tasker plugin : dimmer command.
      *Weather connector : display GPS coordinate if several cities with same name.
      *Bugs Fixes
      Mod Info:
      ● Pro features Unlocked
       ● Release by Kirlif'
      This app has no advertisements
      More Info:

      https://play.google.com/store/apps/details?id=com.imperihome.lite
      Download Instructions:
      https://uploadrar.com/bgu1b7ag1gfb
       
      https://dropapk.com/xf2zeef6llg3
       
      https://douploads.com/ponbfxly33ox
       
    • By Apophis
      Car Mechanic Simulator 18 v1.1.11 (Mod Money)
      Requirements: Android 4.4+
      Overview: Find classic cars inside old barns. 
      Repair engine, brakes, exhaust, gearbox and chassis.


      Remove rust, apply putty and paint your car.
      Sell rebuilt vehicles and become the best car mechanic!
      What's New: 
      Bug Fixes.
      This app has no advertisements
      More Info:

      https://play.google.com/store/apps/details?id=com.playway.cms2017
      Download Instructions:    
      https://uploadrar.com/ev24b3tzju0e
       
      https://dropapk.com/4mihkv621km4
       
      https://douploads.com/m7vj6lob5b80
       
    • By TWD
      Piano Tiles 2™(Don't Tap...2) v3.1.0.908 (Mod)
      Requirements: 4.0.3+
      Overview: Pianotiles2™ is a popular game that has 500 million players around the world.

      In 2016, we have added pop music and new instruments. Slider tiles and Competition of Masters are also presented. The interface is more simple with more fonction such as favorites which simplifies the research of music. This is a better version of Piano Tiles 2 with more splendid music, better gaming experience and more excited hand speed competition. Come and try!
      Game features: 
      1.Finish your achievements to get more diamonds and coins. 
      2.Master's challenge kicks off! Reach the peak experience of speed challenge.
      3.Brand new slider tile gamplay brings you more exciting gaming experiences.
      4.There are more albums and songs of various styles. 
      5.You can add songs to your favorite, play both classical and pop music to enrich your playing experience. 
      6.New interface and new song lists make it easier to choose songs.
      7.Compete with friends and global players
      8.Easy to master with visual effect incomparable
      9.Log in with Facebook and share data on multiple devices
      10.Enjoy a brand-new level of sound quality
      Game rules: 
      Tap on the black tiles while listening to music. Avoid the white ones! Hurry now! Enjoy classical and pop music, challenge your friends, improve your tapping speed!. Compete with your friends and speed up your fingers! 
      Support: 
      Are you having problems? Send email to [email protected] or contact us in game by going to Settings > FAQ and Support.
      Business Cooperation: 
      Cheetah Mobile is now sincerely inviting all the amazing mobile game developers globally to achieve mutual success! we are looking forward to the great games! Contact us on: [email protected] 
      Mod Info:
      All Unlocked
      Mod Gems
      Mod Diamonds
      Mod Lives
      Max Score
      What's New: 
      To optimize your experience. we've fixed some problems.
      This app has interstital advertisements
      More Info:

      https://play.google.com/store/apps/details?id=com.cmplay.tiles2
      Download Instructions:       
      https://www.uploadship.com/d28054fc6069ffbb
      Mirror
      https://uploadbyte.com/gizyt7n31kuq
      http://ul.to/f56tlbct
      https://uploadrar.com/f6wz1tdye36o
      https://dropapk.com/gfkxmo7oq6vk
       
    • By APK
      BimmerCode for BMW and Mini v1.27.2-4786 [Premium]
      Requirements: 4.2
      Overview: BimmerCode allows you to code your BMW or Mini F and G series car to unlock hidden features and customize your car to your liking.


      Activate the digital speed display in the instrument cluster or video while driving in the iDrive system. Do you want to deactivate the Start Stop function or the Active Sound Design? You will be able to code all of this and much more by yourself with the BimmerCode app.
      SUPPORTED VEHICLES
      - 1 Series F20, F21 (2011+)
      - 2 Series F22, F23, F87 (2013+)
      - 2 Series Active Tourer F45 (2014+)
      - 2 Series Gran Tourer F46 (2015+)
      - 3 Series F30, F31, F34, F35, F80 (2011+)
      - 4 Series F32, F33, F36, F82, F83 (2013+)
      - 5 Series F07, F10, F11, F18, G30, G31, G38, F90 (2010+)
      - 6 Series F06, F12, F13, G32 (2011+)
      - 7 Series F01, F02, F03, F04, G11, G12 (2008+)
      - X1 F48 (2015+)
      - X2 F39 (2018+)
      - X3 F25, G01 (2010+)
      - X4 F26, G02 (2018+)
      - X5 F15, F85 (2013+)
      - X6 F16, F86 (2014+)
      - i3 (2013+)
      - i8 (2013+)
      - Mini F54, F55, F56, F57 (2014+)
      You can find a detailed list of the supported functions for your car on http://www.bimmercodeapp.com.
      REQUIRED ACCESSORIES
      To use this app one of the supported OBD adapters is required. For more information please visit http://www.bimmercodeapp.com.
      What's New:
      - Bug fixes
      Premium features unlocked | Analyst removed
      This app has no advertisements
      More Info: credit No_Hammer

      https://play.google.com/store/apps/details?id=de.appomotive.bimmercode&hl=en
      Download Instructions:
      https://uploadrar.com/djbr9u2z3z1u
       
      https://dropapk.com/fdgchwv6ta3j
       
    • By APK
      TextArt ★ Cool Text creator FULL v1.2.0
      Requirements: 2.3 and up
      Overview: TextArt allows you to create incredible text effects, easily and quickly, and share it with your favorite chat app: Twitter, WhatsApp, Line, Talk, WeChat, ChatON, Telegram, or any other chat application.
      Amaze all your contacts 


      USE
      ○ Step 1: Enter the text to send. Use the [Edit Text] button or just double-click the preview area.
      ○ Step 2: Select the preset/design that you like.
      ○ Step 3: Customize the design by changing the font from those available.
      ○ Step 4: Change the color of the new design (text and background).
      ○ Step 5: Set a cool background (built-in textures, solid color, or a custom image)
      ○ Step 6: Change other layout settings: margins, aspect ratio, alignment,...
      At any time you can share with your contacts. It will be shared as an image picture.
      NOTE: TextArt is sent as an optimized image (.jpg compressed or .png). Size in pixels of the resulting images is shown.
      What's New
      ◉ Support for Android 8.x and 9
      ◉ Bugfixes and minor improvements
      paid feature unlocked
      This app has no advertisements
      More Info:

      https://play.google.com/store/apps/details?id=com.jdpapps.textt1&hl=en
      Download Instructions:
      https://uploadrar.com/yjyqoamp8aqd
       
      https://dropapk.com/oj7qf88kjr1c
       
      https://dailyuploads.net/te3bydtmjm7u
       
    • By TWD
      Forgive Me, Father v1.2 build 161 [Paid]
      Requirements: 5.0 and up
      Overview: Want to say what's right, and whats wrong? Want to have the power to punish and forgive? Want to be the Judge of Deeds?

      Take on the role of a priest for the Church of Spades, in a remote parish, and help your people grow under the guidance of the Great Church of Spades.
      Forgive Me Father is a decision-making game in which the player has to balance the impulses of people.
      Some people steal, white others give, some people boast, while others are shy and introvert.
      It is you who will deliver Justice, however you see fit. And since great power also brings great responsibility, it is you who will support the consequences of the Judgement you bring.
      - Analyze the sins of your subjects in the Confessionary
      - Keep the BALANCE in your parish
      - Manage your Purse and your Family
      - Upgrade your parish to fulfill the desires of the Ace of Spades
      Developed in a basement, with care.
      What's New: 
      [v161]
      - Fixed an issue that caused nothing to happen at the start of a new day.
      - Fixed an issue causing some of the deeds for Characters never display.
      - Added an automated error reporter. If the game breaks, we'll know it! Just keep your internet on
      This app has no advertisements
      More Info:

      https://play.google.com/store/apps/details?id=com.libertyfield.fmfgame&hl=en
      Download Instructions:
      https://www.uploadship.com/27db669ec2115073
      Mirror
      https://uploadbyte.com/wbgs64h57zfh
      http://ul.to/ykqyy1bp
      https://uploadev.org/cams7py72s4b
      https://uploadrar.com/ode0woro9x4x
      https://dropapk.com/gypstecuki4q
       
×
×
  • Create New...

Important Information

This website uses cookies for functionality, analytics and advertising purposes as described in our Privacy Policy. By clicking I accept, closing this banner, or continuing to browse our websites, you consent to the use of such cookies.