Jump to content


This topic is now archived and is closed to further replies.


AudioTool v6.2.4

Recommended Posts

AudioTool v6.2.4

Requirements: 2.3 +

Overview: Android SPL, deciBel and RT60 Meter, Spectrum Analyzer, Signal Generator and Polarity Checker Audio Tool.




AudioTool - SPL (deciBel) Meter featuring RT60, Leq, Spectrum Analyzer, Spectrogram, Chart Recorder, Signal Generator, Polarity Checker. Two methods of Mic calibration are offered.


Recommended by "Sound and Vision" magazine.


Features 1/1, 1/3 & 1/6 octave RTA modes, Leq (wideband, Octave, variable duration), RT60 (wideband, Octave), Spectrogram, Peak frequency, Fast, Medium & Slow filters, Flat & A/C Weighting and film industry X Curve, Averaging, SPL Chart Recorder, Noise Criteria, White/Pink Noise, Sine, Square, Triangle, Sweep, Ramp and Impulse signals & loudspeaker polarity checker, L/R select. RTA Store & Load, Hann windows, "Keep Screen On", pinch to zoom, scroll to center.


Exclusive ISO 1/3 Octave Calibration - correct for your phone's microphone response. Octave calibration discs are moved up or down to obtain a flat response, and match the overall SPL to that of an external meter. Save/Restore of Cal files (Dayton Audio iMM-6 also supported).


Use: home theater, audio engineer, car audio, etc


AudioTool FFTs sets of samples recorded at the microphone. Aliasing reduced by Hann windowing. SPL calculated in realtime. Spectra may be saved as files on the SD card, then loaded and displayed with the live spectrum. The "Store" button stores the current live spectrum - "Load" shows a list of stored spectra to select.


To hide the buttons, tap the screen. To restore them, tap again. To zoom the scale, pinch the screen. To move the scale, drag it up or down (left or right).


The deciBel meter uses IIR filters and exponential averaging to calculate Flat, A and C weighted response at speeds of Fast, Medium and Slow speeds.


A pair of cursors can be shown on the RTA and Chart Recorder displays: each can be moved to any position, and will display the SPL & time/frequency values there. Initially, both cursors are positioned mid-screen - simply drag them to a new position with the fingertip. The cursors can be turned on and off in the Menu.


The loudspeaker polarity checker can be used to check whether a loudspeaker is wired in phase: connect the AudioTool output to the speaker under test, select "Polarity" from the signal generator screen, then return to the RTA screen. If the speaker is out of phase (polarity reversed) AudioTool will show "Pol ---", otherwise "Pol +++" if the speaker is in phase.


The Noise Criteria (available from the Menu) function shows a set of NC contours overlaid on the 1/1 Octave RTA display and the calculated real time current NC value is also shown.


The Chart Recorder shows a moving trace of the SPL measurements over the last few minutes.


RT60 measurements can be made by starting the RT60 component using the "RT60" button, and then using a loud clap (or similar) to trigger the measurement. RT60 can also be used with Pink Noise from the AudioTool generator. RT60 times measure how much reverberation or echo there is in a room or auditorium.


The Signal Generator generates White and Pink Noise, Sine, Square, Triangle and Ramp waves, Sine Wave Sweeps and Impulses. The generator uses multiple cycled buffers, refreshed randomly so ensuring truly random White/Pink noise. Pink Noise algorithm uses Kemmet's method to adjust White into Pink.


The frequency accuracy of the generated periodic signals is typically around 1%. Sine wave fidelity is good throughout most of the audio range. Other signals' leading and trailing edges show ringing and decreasing frequency response artifacts in the upper ranges, depending on the Android used.


Please consult the online manual for complete descriptions of the AudioTool features:


Please join the friendly AudioTool Discussion Group to request features, find Calibration files, or report problems. Feedback is always welcome:


Disclaimer: AudioTool's performance depends on your Android hardware, and is not guaranteed to meet any audio measurement or safety standards.


What's New

v6.2.4 New "Massive" font size option in Menu

Improved appearance of RT60 table

Volume slider now updates properly in Generator

Increased app icon size

Please report bugs/problems/desired features on the AudioTool forum or directly via email - thanks!


This app has no advertisements


More Info:


Download Instructions:


Share this post

Link to post
Share on other sites

  • Similar Content

    • By APK
      Dolphin Jetpack v6.2.4
      Requirements: 2.3+
      Overview: Get Dolphin Jetpack to speed up your Dolphin Browser and enjoy more cool features. 
      Dolphin Jetpack uses Dolphin’s very own HTML5 rendering engine that powers Dolphin for the best HTML5 web game and web app experiences.

      Get Dolphin Jetpack to speed up your Dolphin Browser and enjoy more cool features. 
      Dolphin Jetpack uses Dolphin’s very own HTML5 rendering engine that powers Dolphin for the best HTML5 web game and web app experiences.
      After installing, you may check the settings in Dolphin Browser to see whether Dolphin Jetpack is enabled.
      The nitty-gritty
      Dolphin Jetpack is an improved webkit version with extensive canvas/GPU/JavaScript enhancement and behind-the-scenes technology, which makes Dolphin Browser one of the highest scoring HTML5 browsers.
      Super-Fast Dolphin Browser
      How fast? With Dolphin Jetpack enabled, Dolphin Browser is:
      • 5 - 10X faster than the default Android browser and 2X faster than Chrome 
      • Great support for HTML5 attributes run by HTML5test.com
      • First and only browser to make it to the final ring of Ringmark’s benchmark test 
      • Scored highest on Google’s benchmark test Octane. 
      • Scored highest on JavaScript V8 Benchmark
      • Scored highest on industry standard benchmark test, Sunspider
      More cool features
      ★ Flash support. Dolphin Jetpack optimizes the flash playing experience.
      Click on the link below to learn how to play flash content in Dolphin Browser. http://www.dolphin-browser.com 
      Join Dolphin Facebook Fan page: http://www.facebook.com/DolphinFans 
      Follow Dolphin on Twitter: https://twitter.com/#!/DolphinBrowser
      What's New
      ★ Smart cache to SD with Jetpack enabled
      ★ Fixed crash when launching Jetpack on Android L
      ★ Fixed page loading issue due to TLSV1.2 upgrade
      ★ Fixed improper Tamil rendering issue
      ★ Various crash fixes to make Dolphin more stable
      This app has no advertisements
      More Info:
      Download Instructions:

      Dolphin Jetpack v6.2.4 - android-zone.ws.apk -  7.0 MB